BEAUTYPRO Photon LED Light Therapy Facial Mask

Fully charge the handheld controller before first use. Using the velcro bands, attach the straps to the side of the mask and insert the eye shields Plug the cable into the port of the handheld controller Cleanse your skin and dry with a towel Hold the mask... Fully charge the handheld controller before first use. Using the velcro bands, attach the straps to the side of the mask and insert the eye shields Plug the cable into the port of the handheld controller Cleanse your skin and dry with a towel Hold the mask close to your face to position for best fit. Using the straps, fasten the velcro at the back of your head. You can adjust the bands to ensure a snug fit. You want to ensure that the eye shields are secure to your face to prevent light leak Press and hold the power button for 2 seconds to turn on the mask. Press the power button to select a different mode and use the time selection button to choose your treatment time. You can select 10, 20 or 30 minutes When the time has elapsed, the device will switch itself off. If you want to turn off the device during the process , hold the power button for 2 seconds Finish your skincare routine with a sheet mask, serum, moisturiser or oil Repeat 3-5 times per week for the best results. Charging - Connect the controller to an adapter plug using the USB charging cable. Plug into the power supply. The screen will light up and the battery symbol will scroll while charging. Charging time is 2.5 hours. A solid battery symbol represents a full charge. Do not overcharge - disconnect from the power supply when this shows. Advisories - Use a dry cloth or alcohol free wet wipes to clean. Do not rinse under water as the mask is not waterproof. DO NOT use any other cleansing products other than those stated. Use of other cleansing products may damage the BEAUTYPRO PHOTON LED MASK Store the device in a cool, dry space out of direct sunlight or high temperatures. Keep out of reach of children. Never attempt to open or repair the device yourself. The straps contain a mixture of polyester, nylon and lycra. If you are allergic to any of these materials, you may not be able to use the straps. The mask cannot be used while it is in the charging mode. Store the BEAUTYPRO PHOTON LED MASK flat and at room temperature in dry conditions, away from direct sunlight. DO NOT use the BEAUTYPRO PHOTON LED MASK If you are particularly sensitive to light. If you are pregnant, planning on becoming pregnant or breastfeeding. The risk to the foetus, neonate or pregnant women is unknown If you have Glaucoma. If you suffer from epilepsy If you are currently using medication that can cause skin sensitivity to light When sleeping, walking or driving. If you suffer from light induced headaches.